Modern Australian
Men's Weekly

.

Transport is letting Australia down in the race to cut emissions

  • Written by Philip Laird, Honorary Principal Fellow, University of Wollongong

At a time Australia is meant to be reducing its greenhouse emissions, the upward trend in transport sector emissions continues. The latest National Greenhouse Gas Inventory report released last week shows the transport sector emitted 102 million tonnes (Mt) of carbon dioxide equivalent (MtCO₂-e) in the 12 months to September 2019. This was 18.9% of Australia’s emissions.

Overall, the trend in emissions from all sectors have been essentially flat since 2013. If Australia is to reduce emissions, all sectors including transport must pull their weight.

Read more: Four ways our cities can cut transport emissions in a hurry: avoid, shift, share and improve

Transport is letting Australia down in the race to cut emissions Overall trend emissions, by quarter, September 2009 to September 2019. National Greenhouse Gas Inventory

Transport emissions have gone up 64% since 1990. That’s the largest percentage increase of any sector.

Transport is letting Australia down in the race to cut emissions Transport emissions, actual and trend, by quarter, September 2009 to September 2019. Source: National Greenhouse Gas Inventory

Transport sector emissions include the direct burning of fuels for road, rail, domestic aviation and domestic shipping, but exclude electricity for electric trains.

Transport emissions are now equal second with stationary energy (fuels consumed in the manufacturing, construction and commercial sectors and heating) at 18.9%. The electricity sector produces 33.6% of all emissions. The main reasons for transport emissions trending upwards are an over-dependence on cars with high average fuel use and an over-reliance on energy-intensive road freight.

Inevitable results of policy failure

Increasing transport emissions are a result of long-standing government policies on both sides of politics. In 2018, the Climate Council noted:

Australia’s cars are more polluting; our relative investment in and use of public and active transport options is lower than comparable countries; and we lack credible targets, policies, or plans to reduce greenhouse gas pollution from transport.

John Quiggin and Robin Smit recently wrote about vehicle fuel efficiency for The Conversation. They cited new research that indicates emissions from road transport will accelerate. This is largely due to increased sales of heavier vehicles, such as four-wheel drives, and diesel cars.

Read more: We thought Australian cars were using less fuel. New research shows we were wrong

The government has ignored recommendations to adopt mandatory fuel-efficiency standards for road passenger vehicles. Australia is the only OECD country without such standards.

Research by Hugh Saddler found a marked increase in CO₂ emissions from burning diesel (up 21.7Mt between 2011 and 2018). A 2015 Turnbull government initiative to phase in from 2020 to 2025 a standard of 105g of CO₂ per kilometre for light vehicles was “shelved after internal opposition and criticism from the automotive lobby”.

At the same time, the uptake of electric vehicles is slow. Economist Ross Garnaut, in his 2019 book Superpower: Australia’s Low-Carbon Opportunity, sums it up:

Australia is late in preparation for and investment in electric road transport.

Read more: Clean, green machines: the truth about electric vehicle emissions

Australia’s low transport energy efficiency (and so high CO₂ emissions) has also attracted overseas attention. The American Council for an Energy-Efficient Economy rates the world’s 25 largest energy users for sectors including transportation. In 2018, Australia slipped two places to 18th overall. It was 20th for transportation with just 6.5 points out of a possible 25 on nine criteria.

On four of these criteria, Australia scored zero: fuel economy of passenger vehicles, having no fuel-efficiency standards for passenger vehicles and heavy trucks, and having no smart freight programs.

For vehicle travel per capita, the score was half a point. For three metrics – freight task per GDP, use of public transport, and investment in rail transit versus roads – Australia scored just one point each.

Only in one metric, energy intensity of freight transport, did Australia get full marks. This was a result of the very high energy efficiency of the iron ore railways in Western Australia’s Pilbara region.

The International Monetary Fund (IMF) has also questioned the Australian government’s preference for funding roads rather than more energy-efficient rail transport. The IMF says Australia should be spending more on infrastructure, but this should be on rail, airports and seaports, rather than roads.

What can be done

The first thing is to acknowledge that our preferred passenger transport modes of cars and planes cause more emissions than trains, buses, cycling and walking. For example, CO₂ emissions per passenger km can be 171 grams for a passenger car as against 41g for domestic rail.

Transport is letting Australia down in the race to cut emissions Data source: Greenhouse gas reporting: conversion factors 2019 For freight, our high dependence on trucks rather than rail or sea freight increases emissions by a factor of three. Read more: Labor's plan for transport emissions is long on ambition but short on details A 1996 report, Transport and Greenhouse, from what is now the federal Bureau of Infrastructure, Transport and Regional Economics (BITRE), reviewed no fewer than 16 measures (including five “no regrets” measures) to cut transport emissions. In a 2002 report, Greenhouse Policy Options for Transport, BITRE offered 11 measures to reduce vehicle kilometres travelled (VKT), nine measures to reduce emissions per VKT, and four road-pricing measures (mass-distance charges for heavy trucks, tolls, internalising transport externalities and emission charging). BITRE last appeared to revisit this important issue in a 2009 report on transport emission projections to 2020. This report projected a total of 103.87Mt CO₂-e for 2019. Actual 2019 transport emissions will be about 102Mt. It’s important to note that BITRE’s 2009 projection was on a business-as-usual basis. The current level of about 4 tonnes a year per person is where Australia was in 2000. Clearly, Australia needs to do better. As well as the BITRE remedies, another remedy would be to adopt a 2002 National Action Plan approved by the Australian Transport Council in collaboration with the Commonwealth, state and territory governments. The plan included, within ten years, “programs that encourage people to take fewer trips by car” and a shift “from predominantly fixed to predominantly variable costs” to “ensure that transport users experience more of the true cost of their travel choices”. This did not proceed. However, New Zealand has effectively adopted this approach for many years. Petrol excise is now 66.524 cents per litre (just 42.3c/l in Australia) and the revenue goes to the National Land Transport Fund for roads and alternatives to roads, resulting also in lower registration fees for cars. New Zealand has had mass distance pricing for heavy trucks for 40 years. These measures have not stopped its economy performing well. Why do measures that would reduce transport emissions continue to be so elusive in Australia?

Authors: Philip Laird, Honorary Principal Fellow, University of Wollongong

Read more https://theconversation.com/transport-is-letting-australia-down-in-the-race-to-cut-emissions-131905

Best EPD Consultants in Australia

Environmental Product Declarations (EPDs) play an increasingly important role in the Australian construction, manufacturing, and infrastructure sect...

I/O Controller And Its Role In Modern Industrial Automation

Industrial automation relies on a range of advanced technologies to ensure precision, speed, and reliability in day-to-day operations. Among these t...

Hydraulic Systems And Their Importance In Modern Industry

A hydraulic system plays a vital role in powering machinery, controlling movement, and delivering high-force performance across countless industrial...

Why Australian Businesses Are Having a Second Think About Digital Growth

Running a business these days is a whole lot different to how it was even a few short years ago. Customers are better informed, there's more competi...

Restaurants Risk Compliance Issues Amid Commercial Plumber Shortage

As demand for housing, roads and facilities increases, so does the demand for trade workers. According to Infrastructure Australia, the construction i...

The Importance Of A Professional Medical Fitout Melbourne For Modern Healthcare Facilities

Healthcare environments must operate with precision, efficiency, and a strong focus on patient comfort. A well-planned medical fitout Melbourne hel...

Top Safety and Comfort Features to Consider in Family Off Road Caravans

Exploring Australia’s coastline, bush tracks or outback locations is far more enjoyable when travelling in a caravan designed for both comfort and...

“Logistical Nightmare” – Rural and Remote Communities Supply Chain Nightmares

Australia’s road logistics need major reform to counteract the supply chain issues that are hitting rural and regional communities hard. With 80% of...

The Importance Of Quality Bait Boards For Boats To Enhance Fishing Efficiency And Comfort

Fishing enthusiasts understand that having the right equipment on board makes every trip smoother and more enjoyable. One essential accessory for an...

The Essential Safety Gear Every Tradesman Needs

Across industries like construction, electrical work, plumbing, carpentry, and welding, workers face hazards every single day. For tradesmen, having...

Best POS System Features That Boost Customer Experience

Source: Unsplash Starting and scaling a retail business is unlikely possible without an effective Point of Sale (POS) system. It is the tech heartbe...

Understanding SMSF Setup Online and Why More Australians Are Choosing Digital Fund Establishment

liManaging your own superannuation gives you greater control over investments, retirement planning, and long-term financial decision-making. As inte...

Double Carport: Complete Guide to Design, Cost, and Installation

A double carport provides practical, cost-effective protection for two vehicles whilst adding value and functionality to your property. Whether you're...

How External Blinds and Awnings Improve Comfort, Privacy, and Energy Efficiency

Outdoor comfort and protection are essential for homes and commercial properties, especially in regions with strong sunlight, high UV exposure, and ...

Worksite Comfort Upgrades That Boost Team Productivity

Jobsite productivity doesn’t depend solely on tools, training, or scheduling. It also hinges on something often overlooked: worker comfort. When e...

NDIS Occupational Therapy: Your Complete Guide to Accessing Support and Services

Occupational therapy plays a crucial role in helping NDIS participants achieve their goals and improve their daily living skills. For people with disa...

How to Start Trading Futures in Australia: Markets, Margin and Regulation

Futures trading has become increasingly popular among Australian traders seeking opportunities across global commodities, indices, currencies and ener...

The Importance Of Residential Scaffolding For Safe And Efficient Home Projects

Home construction and renovation projects require reliable access systems that prioritise both worker safety and structural stability. Whether the p...