Modern Australian
Times Advertising

VT Markets Releases Fed Policy Analysis Report Predicting USD Outlook for 2025

HONG KONG SAR – Media OutReach Newswire – 30 December 2024 - In September 2024, the Federal Reserve initiated a rate-cutting cycle, lowering rates three times over the year by a total of 100 basis points to a range of 4.25%-4.5%.

While this trajectory appears stable on the surface, the VT Markets research team highlights that factors like inflation rebounds, new government policies, and optimistic economic forecasts might compel the Fed to adopt a more cautious stance on its easing strategy.

The Federal Reserve's "defensive" strategy, in this way, can be interpreted as either a "precise" market insight or a precautionary measure. The VT Markets Research Desk proposes the following perspectives for analysis.

Dot Plot Adjustments May Indicate Slower Rate Cuts

First, the Research Desk considers that during the December Federal Open Market Committee (FOMC) meeting, an 11:1 vote resulted in a rate cut to 4.25%-4.5%, aligning with market expectations. However, the updated dot plot projections surprised markets, slashing 2025's expected rate cuts from four to two.

Although this shift caused short-term market ripples, VT Markets suggests the slower pace reflects economic resilience and labor market strength. The Fed appears focused on avoiding over-stimulation and carefully balancing economic growth against inflation risks.

Strong Economic Data Supports Policy Shift

The Summary of Economic Projections (SEP) reinforces the Fed's cautious approach, with GDP growth forecasts for 2024 and 2025 revised upward from 2% to 2.5% and 2.1%, respectively. Core Personal Consumption Expenditures (PCE) inflation forecasts also rose from 2.2% to 2.5%.

Fed Chair Jerome Powell highlighted these optimistic trends during the Fed's press briefing, emphasising that reduced job market risks and declining housing inflation are pivotal in shaping future rate adjustments.

Challenges from Trump Administration Policies and Inflation Balance

As the Trump administration prepares to take office, the potential impact of its economic policies on inflation and rate cuts remains a focal point. Powell acknowledged that Fed officials have considered factors such as increased tariffs and reduced corporate taxes in their projections. Historical data, however, suggests that trade policies have minimal direct influence on inflation. For example, the 2018-2019 trade wars did not significantly raise inflation due to the limited share of imports in overall consumption.

The Research Desk believes that oil prices remain the primary determinant of inflation trends. The Trump administration's low-oil-price strategy could suppress inflation further, providing more flexibility for the Fed to maintain accommodative policies through 2025.

USD Rebound and Market Outlook

Driven by shifting Fed policies and robust economic data, the U.S. Dollar Index rebounded in Q4 2024, achieving three consecutive months of gains and reaching a two-year high in late November. However, VT Markets anticipates that as 2025 progresses, these expectations may begin to materialise. If inflation rebounds less than anticipated, the Fed could adopt a more dovish stance, potentially capping the Dollar Index's upward trajectory.

Based on these insights, the VT Markets Research Desk advises investors to proceed cautiously, avoid aggressive long positions in the Dollar Index, and remain vigilant for range-bound risks. Monitoring inflation data and policy changes will be key to navigating the market in the coming year.

Hashtag: #VTMarkets #CFDs #CFDsbrokers #USD #USDX

The issuer is solely responsible for the content of this announcement.

What to Know Before Getting Dental Implants: A Guide for First-Time Patients

Dental implants Perth patients often look for a long-term solution for missing teeth without the hassle of dentures or bridges. If you are thinking ...

Why Protective Packaging Matters More Than Ever In Modern Shipping

In today’s fast-paced world of logistics and eCommerce, ensuring that products reach customers safely is a top priority. This is where a bubble wrap...

Pest Control Albury: Protecting Your Property From Hidden Damage And Health Risks

Pests rarely announce their arrival. They creep into spaces quietly, turning small, unnoticed corners into breeding grounds for bigger problems. Tha...

Why Root Canal Treatment Melbourne Is Essential For Saving Natural Teeth

Tooth pain has a way of demanding attention at the worst possible time. When the discomfort becomes persistent and intense, it often signals an infe...

How Bird Flight Diverters Help Protect Wildlife Around Power Infrastructure

Power infrastructure plays an essential role in modern life, but it can also create risks for wildlife, particularly birds moving through establishe...

What Businesses Should Look for in a Commercial Coffee Partner

Choosing a commercial coffee partner is not the same as choosing a machine. It is a broader decision that affects beverage quality, staff efficiency...

3PL Logistics Australia Driving Smarter Supply Chains And Faster Deliveries

In a world where customers expect speed almost as much as quality, logistics has become the silent heartbeat of every successful business. Behind th...

Why Professional Electrical Services Are Essential For Modern Properties

Electricity powers almost every aspect of daily life, from lighting and appliances to complex systems in homes and businesses. This makes choosing a...

What Not to Pack When Moving: The Essential Guide to Smart Packing

Moving house is one of those all-encompassing events in life and most people focus their energy on deciding what to pack. But knowing what not to pa...

From Assistance to Independence: Progression in Daily Living Skills

The ultimate goal of many support systems is to empower individuals to lead lives defined by autonomy and self-reliance. While some support requiremen...

The Cost Difference Between Early Repairs and Delayed Replacement

Automotive maintenance often involves a choice between addressing a small issue immediately or waiting until a component fails completely. When it c...

What Is a Stainless Steel Bar? Applications, Benefits, and Buying Tips

Stainless steel is one of the most widely used materials across industrial and commercial sectors, known for its strength, corrosion resistance, and...

Scholars in Developing Nations Depending on Z library

Access to books often shapes the course of study for scholars who live in regions with thin library shelves and slow supply chains. Many students wo...

6 Cheapest POS Systems in Australia (2026)

The cheapest POS systems in Australia for 2026 are POSApt, Square, Zeller, Loyverse, Epos Now, and Shopify POS (Lite). However, “cheap” does no...

The Ultimate Guide to Automating Your Weekend Yard Chores

We all look forward to the weekend as a chance to unwind after a long week of work. You probably picture yourself relaxing on the patio with a cold ...

How Ignoring Regular Car Servicing Can Lead to Costly Repairs

Owning a car gives you a sweet sense of freedom and comfort. You can go wherever you want, whenever you want. But with that freedom comes responsibili...

Someone Trips at Your Fundraiser. Now What? Understanding Public Liability for NFPs

Three months of planning. Volunteers giving up their weekends. Sponsorships chased, catering sorted, tables decorated. And then, about an hour into ...

Stainless Steel Tube: A Complete Specification Guide for Engineers, Project Managers, and Industrial Buyers

Few materials in the industrial and manufacturing world are as universally relied upon — or as frequently misspecified — as stainless steel tube...